News

Home/News
News2021-04-16T07:58:35+00:00

PIPE SCHEDULE CHART

PIPE SCHEDULE CHART When working with pipe, it is common to describe them by their “schedule”. Someone unfamiliar with pipe schedules may not understand how to determine the measurements. A pipe schedule is a non-dimensional

By |Company News|

WHAT IS NORMALIZING?

WHAT IS NORMALIZING? It is important that the material used for any project possesses the correct mechanical properties for the specific application. Heat Treatment processes are often used to alter the mechanical properties of a

By |Company News|

WHAT IS AN ALLOY?

WHAT IS AN ALLOY? An alloy is a combination of a metal with at least one other metal or nonmetal. The combination must be part of a solid solution, a compound, or a mixture with

By |Company News|

WHAT IS TEMPERING?

WHAT IS TEMPERING? Tempering is a heat treatment process that alters the mechanical properties (typically ductility and hardness) and relieves internal stresses of a steel. Tempering allows carbon trapped in a martensitic microstructure to disperse,

By |Company News|

WHAT IS METAL FATIGUE?

WHAT IS METAL FATIGUE? Metal fatigue is one of the subtlest types of metal failures, and one of the most dangerous. Although metal failure can occur from excessive tensile loads, shear loads and impact loads,

By |Company News|

WHAT IS ANNEALING?

WHAT IS ANNEALING? While the chemical composition of a metal determines much of the mechanical properties, many metals can have their mechanical properties altered through heat treatment. There are many different types of heat treatment

By |Company News|
Go to Top