Project Description

ANT-L2 Air Purifier

We are committed to integrate steel resources in china and serve the global steel market. We have 15+ years of experience in steel researching and production.

Our ability to purchase materials directly from leading mills will give you the competitive edge. Any Questions Just Call +86-731-89903933.

Get Your Free Quote

Our casing pipes are manufactured according to API grades and also in proprietary grades including sour, high collapse, chrome and CRA products for special applications.

Section: Seamless and Welded

Standards:

Sizes: Outside Diameter: 1.660″ – 30″

Grades: H40, J55, K55, N80,N80Q, L80, C90, C95, T95, P110, Q125,SS95,SS110, 9%CR, 13%CR

Some of the OCTG casing tubing available for your company’s requirements include:

General drill pipes, casing tubing conforming to API standards for oil field and deep well drilling

  • API H40 casing tubing – general purpose pipes conforming to API specification 5CT
  • API J55 general purpose pipes for casing tubing applications, similar to specification K55 with lower minimum tensile strength conforming to API specification 5CT
  • API K55 general purpose pipes used primarily in casings conforming to API specification 5CT
  • API L80 casing tubing conforming to API specification 5CT with a controlled yield strength with hardness test requirement of 23 HRC maximum; usually used in wells with sour (H2S) environments or deep sour wells
  • API N80 or N80 Q&T (Quench and Tempered) – general purpose pipe manufactured to API specification 5CT
  • API Normalized N80 – lower-cost alternative to standard Q&T N80; pipe walls less than 0.500 inch; inspections, testing and dimensions are in accordance with API 5CT for grade N80. Charpy v-notch impact test absorbed energy results conform to API SR16 and are lower Q&T N80
  • API C90 – an API controlled yield strength grade (25.4 HRC maximum) generally used in sour condensate wells; with required extensive hardness testing, SSCC testing per NACE Standard TM-0177-Method A; minimum threshold stress required is 80% of specified minimum yield strength
  • API C95 – same strength range as T95 and U. S. Steel C95, but without a hardness requirement; generally not used in sour wells
  • API T95 – API controlled yield strength grade (25.4 HRC maximum), the same as API C95 and U. S. Steel C95; generally for use in sour condensate wells; extensive hardness testing is required including SSCC testing per NACE Standard TM-0177-Method A; minimum threshold stress required is 80% of specified minimum yield strength
  • API P110 – generally used in deep wells; this grade is not suitable for most sour condensate wells
  • API Q125 – API grade for deep well service, generally not for use in sour condensate wells; quadrant hardness testing is required (no specified hardness limits other than the variation between readings); impact testing required for each heat and/or lot; typically EMI and UT NDT inspections are required

Connections:

  • STC (short round thread casing)
  • LTC (long round thread casing)
  • BTC (buttress thread casing)
  • XL (extreme-line casing)
  • Premium Connections
  • VAM, VAMTOP, NEW VAM
  • And almost any premium & gas tight connection

Length: Range 1, Range 2 & Range 3:

Applicable Tests: See our Standard Inspection Scope

Protection:

  • External bare and uncoated or externally coated with black/ transparent anti rust Mill varnish
  • Plastic or Metal Pin and Box Protectors.
  • Internal plastic coating or sleeves.

Mill Test Certificates:

  • Issued in accordance with API Specification 5CT Eighth Edition
  • Additional Third Party Inspection can also be performed on request.

We are committed to integrate steel resources in china and serve the global steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national famous steel enterprise before. In the aspect of resources and information, we have established cooperative relationship with nearly hundred enterprises, either state-owned or private owned in China.

What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want. We provide preffesional one-stop service to the Contractors of follows project:

  • Oil and Gas Pipeline Construction
  • Onshore and Offshore
  • Boiler Manufacturers
  • Oil Refining Equipment
  • Petroleum and Chemical Plant Construction
  • Fire Protection
  • Heating & Air Conditioning

Our ability to purchase materials directly from leading mills at the best possible price will give you the competitive edge. This coupled with a skilled workforce dedicated to embracing the demands of the markets we serve. Just give us a call +86-731-89903933.

    Customer Name *
    Company
    E-mail Address *
    Phone Number
    Country *
    Address

    Please Try to Tell Us More Information:

    ShunFu Metal is proud to provide each of our customers with a quality experience, both with products and customer service. Every product is made under strict quality control system.